Local convective boiling heat transfer and pressure drop of nanofluid in narrow rectangular channels.
Fiche publication
Date publication
décembre 2010
Auteurs
Membres identifiés du Cancéropôle Est :
Dr DE LABACHELERIE Michel
Tous les auteurs :
Boudouh M, Gualous HL, De Labachelerie M
Lien Pubmed
Résumé
This paper reports an experimental study on convective boiling heat transfer of nanofluids and deionized water flowing in a multichannel. The test copper plate contains 50 parallel rectangular mini-channels of hydraulic diameter 800 pm. Experiments were performed to characterize the local heat transfer coefficients and surface temperature using copper water nanofluids with very small nanoparticles concentration. Axial distribution of local heat transfer is estimated using a non-intrusive method. Only responses of thermocouples located inside the wall are used to solve inverse heat conduction problem. It is shown that the distribution of the local heat flux, surface temperature, and local heat transfer coefficient is dependent on the axial location and nanoparticles concentration. The local heat transfer coefficients estimated inversely are close to those determined from the correlation of Kandlikar and Balasubramanian [An extension of the flow boiling correlation to transition, laminar and deep laminar flows in minichannels and microchannels, Heat Transfer Eng. 25 (3) (2004) 86-93.] for boiling water. It is shown that the local heat flux, local vapor quality, and local heat transfer coefficient increase with copper nanoparticles concentration. The surface temperature is high for de-ionized water and it decreases with copper nanoparticles concentration. (C) 2010 Elsevier Ltd. All rights reserved.
Référence
Appl Therm Eng. 2010 Dec;30(17-18):2619-31.